Thermal Treatment
CTIS/CTID
mash thermal conditioner and pellet mill or extruter super conditioner
-
Anti-salmonella bacteriological treatment
-
To make high flowability feeds
-
High nutrition efficiency due to increased digestibility
-
Higher level of liquid absorption
-
Moisture content control
Product is through steam injection heat treated within the inclined and heated
conditioning chamber including one or two rotors.
When used as per super conditioner in front of pellet mill or extruder :
-
Monitored resident time from 1 to 3 minutes
-
Product temperature up to 85 degrees
-
Pelletizing and crumbling energy costs significantly reduced
RCCS-TF dryer cooler
The RCCS-TF cooler has been especially designed for cooleing heat treated meals.
It is also suitable for pellets cooling
The resident time is accurately monitored with full emptying of the chamber.
The top floor is used for drying, including an heater air inlet. Others 2 floors
are cooling stages and connected to a hygienic treated inlet air from outside.
The meal stay onto each floor for an adjusted resident time according the
throughput rate of the process. It is moved through special rotating arms and
fluidised through raising up air flows. |